Anthe Building Update No. 4(?)

Funky Winkerbean is expressing concerned we won’t correctly interpret our architect’s approved drawings for Phase 1 of the Anthe Building restoration. (Photo by Lucy May)

I’m not sure what counts as an update in Christopher lexicon – but this is the fourth numbered update on what’s been happening at what will become the new Lost Art Press headquarters, so we’ll go with No. 4! (You can read an FAQ about plans for the new space in this June 28 post.)

The view from the back, looking forward to what will eventually become a retail space (on the far side of the framing). In the foreground is the bathroom.

We received the stamp of approval from the county last week to proceed with the plans as drawn by our Cincinnati-based architect and friend, Trenton Bradford (whom we first met as a student in an ATC class, and we’re awfully glad we did!). Our general contractor, Bill Kreidler (BK Remodeling), has been working at warp speed on framing the walls to replace the old and falling-down ones (and salvaging the old beadboard for re-use) and get all the subcontractors in for the drywall, plumbing, electric, painting….

Listen beautiful relax classics on our Youtube channel.

The Floor
Chris and I sprayed the floor with two heavy coats of shellac to encapsulate some residual machine oil odor after multiple floor scrubbings, and to offer a modicum of protection for the original floorboards (and the new patches that were installed where necessary).

The Bathroom
We got the OK on the bathroom framing two weeks ago – so that’s the most visible and functional change to report: We have a functioning bathroom, complete with tile (that you cannot see much of it in the picture below because it’s currently protected with cardboard). The bathroom is ADA compliant, or will be, as soon as we get the grab bars on the walls. Oh – and we need to get the door installed.

The interior of the new bathroom. I am fond of the exposed brick around the window, with its vestiges of decades-old (possibly a century-old, but probably not) paint.

The bathroom exterior is clad in beadboard that has been painted and glazed to look like the 100-year-old beadboard that was salvaged from the “front of house” (we’ll be using that salvaged stuff on the interior of what will some day become the storefront). The interior is white painted-and-glazed beadboard. I’m fairly certain the end of the rafter tails will be left unpainted (this is, after all, a warehouse!). Atop the bathroom, we’ll be storing boxes and other packing materials.

We couldn’t resist the vintage look of this sink and faucet set. I am particularly fond of the sprayer and soap pedestal.

The Slop Sink
I love our Watermark Fixtures slop sink. In a fit of moving too quickly, we initially got it for the bathroom – but of course it would be impossible to get a wheelchair up to it, so we chose a different one to use in that space. Instead, we have an awfully fancy utility sink hanging on the outside back of the bathroom. In hindsight, that’s a better place for it anyway – it’s more visible. Most important though, we now have easy access to running water!

The Framing
BK and his tireless employee, Eric, are done with the first-floor framing and are getting started in the basement on Monday. I just have to find some not-ugly fire doors to install in the two openings that will lead to the stairwell before we get the drywallers in to add two layers of type X drywall to the walls and type C to the ceilings up front. For the basement, an ugly door will do. (If anyone can point me toward a not-butt-ugly Shaker, Craftsman, or otherwise plain-but-not-flat-slab pre-hung 90-minute fire rated door, 32″ or 36″ wide, I’d greatly appreciate it. Finding doors that meet requirements at which we can also bear to look has proven to be a difficult challenge!)

In order the apply for temporary occupancy, we have to have the safety requirements in place in at least the basement and first floor, so we’re trying to move as quickly as possible on these fronts.

The shelving, and dwindling pile of beadboard as seen from the front of the first floor (with a glimpse at what will be the fire-rated wall along the stairwell).

The Shelving
We are allowed to use the space for storage for now; all the shipping work we’ve been doing in Covington has been out of the editorial offices and machine room at Willard. And it’s been getting awfully crowded with the necessary packing materials and tools, so our new employees, Gabe and Mark, erected some shelving (out of the way of BK’s work) to provide some much-needed storage. And when they need more boxes, the Anthe building is less than a mile away.

And that’s about it for now – but stay tuned: If we can get the fire doors in place and the drywallers in quickly, we should be able to move all shipping operations to Anthe soon!

Fitz

p.s. If you’d like to learn more about the Anthe Building, and perhaps help with renovations, please check out this page on our main site.

p.p.s. We’ll be giving tours of the new space at 1 p.m. and 3 p.m. during our open house on July 29, leaving from 837 Willard St. More info here.

Source: lostartpress.com

No votes yet.
Please wait...
Loading...