More Soft Wax 2.0 & More Stock Alerts

Katherine finished her college midterms this week, drove home and made her biggest batch of Soft Wax 2.0 yet. It is now up for sale in her store. Bean, shown above, is always happy to put on his “please-buy-my-mom’s-wax-so-I-can-have-treats” face. Note: This is always his face.

This is the finish I use on my chairs. Katherine cooks it up here in the machine room using a waterless process. She then packages it in a tough glass jar with a metal screw-top lid. She applies her hand-designed label to each lid, boxes up the jars and ships them in a durable cardboard mailer. The money she makes from wax helps her make ends meet at college. Instructions for the wax are below.

Listen beautiful relax classics on our Youtube channel.

Dividers & Posters

We are (I think) keeping up with divider production. We have a big batch of dividers in the store now with another big batch in the mail that will arrive in the warehouse Monday. We have ironed out all the production hiccups with our Type 2 Dividers, and we are just about to dive into a fresh set of problems with our first pour of our Crucible Planing Stop this month. 

We also have a good stock of our “Family Tree of Chairs” letterpress posters in both green and black ink. This is our final run with this design. So if you want one, buy one or forever hold your comments. These posters are $33, which is a very nice price for posters of this quality. They are printed on heavyweight cotton paper via letterpress, a mechanical process that creates a delightfully tactile print.

Instructions for Soft Wax 2.0
Soft Wax 2.0 is a safe finish for bare wood that is incredibly easy to apply and imparts a beautiful low luster to the wood.

The finish is made by cooking raw, organic linseed oil (from the flax plant) and combining it with cosmetics-grade beeswax and a small amount of a citrus-based solvent. The result is that this finish can be applied without special safety equipment, such as a respirator. The only safety caution is to dry the rags out flat you used to apply before throwing them away. (All linseed oil generates heat as it cures, and there is a small but real chance of the rags catching fire if they are bunched up while wet.)

Soft Wax 2.0 is an ideal finish for pieces that will be touched a lot, such as chairs, turned objects and spoons. The finish does not build a film, so the wood feels like wood – not plastic. Because of this, the wax does not provide a strong barrier against water or alcohol. If you use it on countertops or a kitchen table, you will need to touch it up every once in a while. Simply add a little more Soft Wax to a deteriorated finish and the repair is done – no stripping or additional chemicals needed.

Soft Wax 2.0 is not intended to be used over a film finish (such as lacquer, shellac or varnish). It is best used on bare wood. However, you can apply it over a porous finish, such as milk paint.

APPLICATION INSTRUCTIONS (VERY IMPORTANT): Applying Soft Wax 2.0 is so easy if you follow the simple instructions. On bare wood, apply a thin coat of soft wax using a rag, applicator pad, 3M gray pad or steel wool. Allow the finish to soak in about 15 minutes. Then, with a clean rag or towel, wipe the entire surface until it feels dry. Do not leave any excess finish on the surface. If you do leave some behind, the wood will get gummy and sticky.

The finish will be dry enough to use in a couple hours. After a couple weeks, the oil will be fully cured. After that, you can add a second coat (or not). A second coat will add more sheen and a little more protection to the wood.

Soft Wax 2.0 is made in small batches in Kentucky using a waterless process. Each glass jar contains 8 oz. of soft wax, enough for at least two chairs.


No votes yet.
Please wait...